Daily matches RX King

Daily matches RX King

1. Raise compression

Many riders naikin compression method, can be a way turner, etc.. Enough to replace the standard thinner gasket.

2. Chief zero resistor spark plugs

To enlarge the ignition can be by using head plugs (plugs cop) zero resistor.

3. Muffler variation

These devices are a very important role in the induction and exhaust. For added performance exhaust please take it to the cobbler and have made sekatnya reduced. If there is money still mending buy aftermarket exhaust.

4. Valve reed / Membrane (Reed valve)

The presence in the intake (which connects the carburetor to the intake towards the engine block). Can replace the use of reed valve has RGR. Cheap, the only Rp. 20-30 thousand pair. Or just a bit Mahalan carbon models can cost thousands nyampe Rp.100. Reed tongue valvenya (iron rich nyabang curved snake tongue) again sealed away in order to open the reed valve closes faster. It's just a shortage of this model valve durable baseball most only three months of the end of the reed valve is usually already on grepes or chipped. The surplus is more flexible just wrote.

5. Setting back the carburetor

For standard reamer do not need, just replace the pilot and main jet wrote. Just try changing the second nozzle step by step. Suppose PJ / MJ standard 22.5/150 naikin 1 step ahead to 25/155 (usually the size of the increase is 2.5) if still less sip PJ naikin 1 step further into 27.5/155. it is enough.

6. Porting polish

Orange peel is in the engine block to make it more smoothly again smoothed inflow and exhaust.